 |
EAGLE Sun Controls
Differential Temperature Controllers from IMC Instruments, Inc.
FEATURES... a local full messaging 40 character LCD display to provide
complete system status information including past High and Low peak temperatures, collector and storage tank
temperatures, Flashing system override messages, extra temperature sensors and much more. A remote 80
character LCD readout can be connected to the EAGLE 2 controller up to 300 feet away. The LCD displays are
visible in direct sunlight as well as in complete darkness. A "PC" interface is also available with a built
in transmitter for transmission lengths in excess of 500 feet. Data logging is possible with a PC for
extended periods of time. Service and diagnostics have been GREATLY reduced because of all these
informational features. Service personnel no longer have to guess if sensor signals are measured properly
with messages such as SENSOR OPEN, SENSOR SHORTED, PUMP SWITCH ON and so on. The EAGLE TWO DIFFERENTIAL
CONTROLLERS are designed with the Installation and Service contractor RAPID STARTUP AND DIAGNOSTICS foremost
in mind. Full alphanumeric digital displays are at the center of the EAGLE TWO CONTROLLERS.
- Microprocessor accuracy and dependability with ambient operation from -10 to 120°F
- Large easy to read 40 character (20x2) back lighted LCD display showing every single parameter measured and/or controlled by the differential temperature controller system
- Plugin adapter for IMC's REMOTE DISPLAY monitor and indicator for distances up to 150 fee with RJ45 extension.
- Diagnostic and Fault LED indicators for quick servicing and diagnostics.
- PC Serial DATA port with built in transmitter for up to 500 foot cable transmission lengths for complete ease in startup and diagnostics. Full industrial isolation is available for a safe PC interface.
- Long term diagnostics and PC data logging with Windows "Terminal" standard software.
- Fast and easy installation with screw-less sensor terminals and easy access for all other wiring.
- Electrostatic discharge protected.
- True one HP Hi-Reliability relay operation.
- Industrial Rated 400 °F(200°C) 10 K thermistors with +/- 1 °F accuracy.
- Two additional auxiliary Thermistor inputs which can be located up to 1000' away.
- Low temperature shut down override and Freeze protection override selectable SAFETY modes of operation.
|
|
"Click here" to view the Eagle 1 Service and Installation Instructions
"Click here" to view the Eagle 2 Service and Installation Instructions
|
|
